There are many kinds of siding for your home. Cement board house siding makes for a durable siding option. It can withstand extreme cold and rain as well as wind. It is also insect-free. It is an excellent choice for Fort Worth, TX homes.
There are two main types for cement boards. The first type is made from Portland cement. The second is made from a combination of cement fibers and plant fibers. These fibers give the board its durability and flexibility. The fibers can be pulverized in water, and then mixed with a variety additives. A typical cement fiber board can contain up to 8 percent cellulose, 40 to 60 percent cement, and 20 to 30 percent cellulose fillers.
Installing a cement board onto a wood or metal frame will require you to use screws. To ensure strength, screws should have a ring shank. Also, ensure that the screws meet the surface. You should also ensure that the screws are not too deep to weaken the board's hold.
If you plan to install cement board, make sure that it is well ventilated. Mold problems can occur if there isn't enough airflow. If you're installing the board in a place where it'll be exposed to moisture, you'll need to apply a waterproofing layer behind the board. You can also add a water barrier to stop water from entering the space. These materials are available at your local hardware store.
Before you start installing cement boards, measure the space. You should leave at minimum a quarter inch of space between each board piece to allow for heat expansion. A drywall T-square is a great way to measure the dimensions. You'll need to install the board over a thin layer of adhesive mortar.
After you have installed the cement board you will need to seal it and use a silicone-based caulk to stop leakage. You can use a drywall screw to attach the board to the wall. Pre-drilling fasteners is a good idea. A ring shank nail can be used if you don’t own a screw for drywall.
To prevent the tiles from bursting, you will need to cover your board with a backer if it is installed over brick or tile. To keep the tiles from sliding, you'll need to apply a water-resistant coating. This is especially important if you plan to expose the tiles to moisture. If the space has water spray or showers you'll need to waterproof it. If you plan on installing the cement board to a floor you can use a vapor barrier. For attaching the board to a floor, you can use a screwdriver and a ring shank nail.
A grinder and a circular saw are required for cutting cement board. A carbide-tipped cutter blade will also be needed. It is best to cut the board outdoors. This will reduce the unpleasant skunky odor that can result from cutting cement board.
FAQ
How do I select a competent contractor?
Ask family and friends for referrals when looking for a contractor. You can also look online for reviews. It is important to confirm that the contractor that you choose has worked in the same area as you. Check out references and ask for them to provide you with some.
Is it better to hire a general contractor or a subcontractor?
A general contractor will usually cost more than a subcontractor. General contractors have many employees so often charge their clients a high amount for labor costs. A subcontractor hires only one employee so they charge less per an hour.
Should you do floors or walls first?
It is the best way to begin any project. It's important to think about how you are going to use the space, who will use it and why they need it. This will help you choose flooring or wallcoverings.
If you have decided that you want to create an open plan kitchen/living area then you may choose to install flooring first. If you have chosen to make this room private then you could opt for wall coverings instead.
Do I need permits to renovate my house?
Yes. Permits will be required for any home-improvement project. In most cases, you will need a building permit and a plumbing permit. You might also require a zoning permission depending on which type of construction is being undertaken.
How can I prevent being scammed when renovating my house
The best way to avoid being ripped off is to know what you are paying for. Read the fine print before signing any contract. You should also not sign any unsigned contracts. Always request a copy of any signed contracts.
You can live in a house while it is being renovated.
Yes, I am able to live in a house and renovate it.
Can you live in a house while renovations are going on? The answer depends on how long the construction work takes. If the renovation process lasts less than 2 months, then yes, you can live in your home while it's under construction. If the renovation takes longer than two weeks, however, you can't live in your home during the construction.
You should not live in your house while there is a major building project underway. This is because you could be injured or even killed by falling objects on the construction site. The heavy machinery and noise pollution at the job site can also cause dust and noise pollution.
This is especially true when you live in a multistory house. If this happens, the sound and vibration caused by the construction workers can cause significant damage to your home and contents.
You'll also need to cope with the inconvenience of living in temporary housing while your house is being renovated. You won't have all the amenities of your home.
When your dryer and washing machine are in repair, for example, you won't have access to them. Additionally, the smell of paint fumes or other chemicals will be a constant annoyance as well as the banging sound made by workers.
All of these factors can create stress and anxiety for you and your loved ones. Therefore, it is important to plan ahead in order not to feel overwhelmed by the situation.
To avoid costly mistakes, do your homework before you make any decisions about renovating your home.
You can also consider professional advice from a trusted contractor to ensure smooth running of your project.
Statistics
- On jumbo loans of more than $636,150, you'll be able to borrow up to 80% of the home's completed value. (kiplinger.com)
- It is advisable, however, to have a contingency of 10–20 per cent to allow for the unexpected expenses that can arise when renovating older homes. (realhomes.com)
- A final payment of, say, 5% to 10% will be due when the space is livable and usable (your contract probably will say "substantial completion"). (kiplinger.com)
- ‘The potential added value of a loft conversion, which could create an extra bedroom and ensuite, could be as much as 20 per cent and 15 per cent for a garage conversion.' (realhomes.com)
- The average fixed rate for a home-equity loan was recently 5.27%, and the average variable rate for a HELOC was 5.49%, according to Bankrate.com. (kiplinger.com)
External Links
How To
How do you renovate an old house?
It is important to first decide the type of renovation you wish to do. This could mean anything from replacing your kitchen appliance to completely redesigning the house.
Once you have decided what type of renovations you want to undertake, the next step is to determine how much money it will cost. You might find that you don't actually have enough funds to cover the full cost of the entire project. If this is true, you will need to make hard decisions about which areas you can afford to fix and which ones you won't.
There are many things to remember before you begin work if you have decided to do renovations. The most important thing is to ensure that you get any permits required for the job. Also, check to see if you need planning permission in order to do certain types work. You might have to apply for building permission if you want to add an extension to your home.
Before you start work on the house it is best to check with the local council website to determine if additional permits are required. Also, check whether you need planning permission for each part of the house that you intend to renovate. You might also need to check with your insurance provider if you are undertaking major work such as installing a roof.
After obtaining all permits, the next step is to select the right tools and materials. You have many options. It is important to carefully research all of them. Some of the most common items that people use during their renovation projects include paint, wallpaper paste, flooring, tiles, carpets, insulation, fencing, doors, windows, lighting, plumbing, heating systems, electrical wiring, plasterboard, timber, concrete, bricks, tiling, mirrors, sinks, taps, toilets, washing machines, ovens, refrigerators, microwaves, dishwashers, vacuum cleaners, carpet cleaning equipment, air conditioning units, fireplaces, chimneys, and even garden furniture!
Make sure you look at the product's quality before purchasing these items. Quality products last longer than cheaper products and are less expensive. When you are buying any item, ensure that you only purchase what is necessary for the job. It's important to not buy too much. You could waste valuable resources and end up with a lot of wasted material. You should instead buy only what you really need.
Once you've decided on the materials you want to use, you must plan where you'll keep them while you are working on the property. If you're renovating a large area of the house, then you might need to rent storage space in order to keep all your supplies safe until you're ready to put them back inside the house. You might also consider asking family and friends to move your belongings around.